Titanium Filter cartridge
Short Description:
Porous titanium filters are made of ultrapure titanium using special process through sintering. Their porous structure is uniform and stable, having high porosity and high interception efficiency. Titanium filters are also temperature insensitive, anticorrosive, highly mechanical, regenerative, and durable, applicable to filter various gases and liquids. In particular widely use to remove carbon in pharmacy industry.
Titanium Filter
Porous titanium filters are made of ultrapure titanium using special process through sintering. Their porous structure is uniform and stable, having high porosity and high interception efficiency. Titanium filters are also temperature insensitive, anticorrosive, highly mechanical, regenerative, and durable, applicable to filter various gases and liquids. In particular widely use to remove carbon in pharmacy industry.
Key Features
◇ Strong chemical anticorrosion, wide application range, heat resistance, anti-oxidation, can cleaning repeatable, long service life;
◇ Applicable to liquid, steam, and gas filtering; strong pressure resistance;
Typical Applications
◇ Removing carbon during the process of thinning or thickening liquids to be infused, injections, eye drops, and APIs;
◇ Filtering high-temperature steams, superfine crystals, catalysts, catalytic gases;
◇ Precise filtrating water treatment systems after ozone sterilization and aerated filtering;
◇ Clarifying and filtering beers, beverages, mineral water, spirits, soy, vegetable oils, and vinegars;
Key Specifications
◇ Removal rating: 0.45, 1.0, 3.0, 5.0, 10, 20 (unit: μm)
◇ Porosity: 28%~50%
◇ Pressure resistance: 0.5~1.5MPa
◇ Heat resistance: ≤ 300°C (wet state)
◇ Maximum working pressure difference: 0.6 MPa
◇ Filter End caps: M20 screw thread, 226 plug
◇ Filter length: 10", 20", 30"
Ordering Information
TB--□--H--○--☆--△
|
□ |
○ |
☆ |
|
△ |
||||||
|
No. |
Removal rating (μm) |
No. |
Length |
No. |
End caps |
No. |
O-rings material |
|||
|
004 |
0.45 |
1 |
10” |
M |
M20 screw thread |
S |
Silicone rubber |
|||
|
010 |
1.0 |
2 |
20” |
R |
226 plug |
E |
EPDM |
|||
|
030 |
3.0 |
3 |
30” |
|
|
B |
NBR |
|||
|
050 |
5.0 |
|
|
|
|
V |
Fluorine rubber |
|||
|
100 |
10 |
|
|
|
|
F |
Wrapped fluorine rubber |
|||
|
200 |
20 |
|
|
|
|
|
||||
