Massive Selection for Nylon Membrane Pleated Filter Cartridge - Glass Firber membrane filter cartridge – kinda
Short Description:
Massive Selection for Nylon Membrane Pleated Filter Cartridge - Glass Firber membrane filter cartridge – kinda Detail:
Glass Fibre Pleated Cartridge
This series filter cartridges are made of superfine glass fiber, showing extremely high dirt holding capacity, applicable to the pre-filtering of gases and liquids. Due to the ultralow protein absorption capability, they are also widely used in bio-pharmacy.
Key Features
High porosity, small differential pressure, strong dirt holding capacity, long service life;
With universal chemical compatibility and can filter acid-proof, alkali resistance, corrosion resistance liquids and organic solvents;
Deeply pleated structure with large filter area, quick flow rate and low protein absorption capability, improving the flow rate and filter efficiency;
Material Construction
◇ Filter medium: Superfine glass fiber (GF)
◇ Support/drainage: PP
◇ Core and cage: PP
◇ O-rings: see the cartridge list
◇ Seal method: melting
Typical Applications
◇ Removing oils, particles, and impurities out of compressed air;
◇ Air pre-filtering and precise filtration in the fermentation field;
◇ Removing cell debris and suspended solids in the bio-pharmacy field;
Operating Conditions
◇ Maximum working temperature: 80°C
◇ Sterilization temperature: 121°C; 30 minutes
◇ Maximum positive pressure difference: 0.42 MPa, 25°C
◇ Maximum negative pressure difference: 0.28 MPa, 60°C
Key Specifications
◇ Removal rating: 0.45, 0.7, 1.2, 3.0, 5.0, 10 (unit: μm)
◇ Effective filter area: 0.4~2.0 m2 /10″
◇ Outer diameter: 69 mm, 83 mm, 130 mm
Ordering Information
SCC–□–H–○–☆–△
□ |
○ |
☆ |
|
△ |
||||||
No. |
Removal rating (μm) |
No. |
Length |
No. |
End caps |
No. |
O-rings material |
|||
004 |
0.45 |
5 |
5” |
A |
215/flat |
S |
Silicone rubber |
|||
006 |
0.7 |
1 |
10” |
B |
Both ends flat/both ends passing |
E |
EPDM |
|||
010 |
1.2 |
2 |
20” |
F |
Both ends flat/one end sealed |
B |
NBR |
|||
030 |
3.0 |
3 |
30” |
H |
Inner O-ring/flat |
V |
Fluorine rubber |
|||
050 |
5.0 |
4 |
40” |
J |
222 stainless steel liner/flat |
F |
Wrapped fluorine rubber |
|||
100 |
10 |
|
|
K |
222 stainless steel liner/fin |
|
|
|||
|
|
|
|
M |
222/flat |
|
|
|||
|
|
|
|
P |
222/fin |
|
|
|||
|
|
|
|
Q |
226/fin |
|
|
|||
|
|
|
|
O |
226/flat |
|
|
|||
|
|
|
|
R |
226 stainless steel liner/fin |
|
|
|||
|
|
|
|
W |
226 stainless steel liner/flat |
|
Product detail pictures:
Related Product Guide:
Our personnel are always in the spirit of "continuous improvement and excellence", and with the superior quality products, favorable price and good after-sales services, we try to win every customer's trust for Massive Selection for Nylon Membrane Pleated Filter Cartridge - Glass Firber membrane filter cartridge – kinda, The product will supply to all over the world, such as: Palestine, Madagascar, Birmingham, Our company sets up several departments, including production department, sales department, quality control department and sevice center,etc. only for accomplish the good-quality product to meet customer's demand, all of our products have been strictly inspected before shipment. We always think about the question on the side of the customers,because you win,we win!
By Mario from Serbia - 2018.05.15 10:52
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
By Raymond from Bangalore - 2018.02.12 14:52