High Particle Holding Polyethersulphone Cartridge
Short Description:
HFS series cartridges are made of Dura series hydrophilic asymmetric sulfonated PES. They have universal chemical compatibility, PH range 3~11. They feature large throughput, large dirt holding capacity, and long service life, applicable to bio-pharmacy, food & beverage & beer, and other fields. Before delivery, each cartridge has experienced 100% integrity test, to ensure product filter efficiency. HFS cartridges are endurable to repeated online steam or high-pressure disinfection, meeting asepsis requirements of new version GMP.
High Particle Holding Polyethersulphone Cartridge
HFS series cartridges are made of Dura series hydrophilic asymmetric sulfonated PES. They have universal chemical compatibility, PH range 3~11. They feature large throughput, large dirt holding capacity, and long service life, applicable to bio-pharmacy, food & beverage & beer, and other fields. Before delivery, each cartridge has experienced 100% integrity test, to ensure product filter efficiency. HFS cartridges are endurable to repeated online steam or high-pressure disinfection, meeting asepsis requirements of new version GMP.
Key Features
◇ Excellent hydrophile; easy to get wet; low protein absorption rate;
◇ Thickened sponge layer, improving dirt holding capacity and throughput, prolonging service life of cartridges;
◇ Single- or double-layer; solid structure; endurable to repeated online sterilization;
◇ Cartridge independently numbered; production batch traceable;
Typical Applications
◇ Pre-filtering and sterilization of biological vaccines, blood products, cell culture solutions, and serums;
◇ Removing bacteria and yeasts out of foods & beverages, beers, and wines;
Material Construction
◇ Filter medium: PES
◇ Support/drainage: PP
◇ Core and cage: PP
◇ O-rings: see the cartridge list
◇ Seal method: melting
Operating Conditions
◇ Maximum working temperature: 90°C, 0.20 Mpa
◇ Sterilization temperature: 121°C; 30 minutes
◇ Maximum positive pressure difference: 0.40 MPa, 25°C
◇ Maximum negative pressure difference: 0.21 MPa, 25°C
Key Specifications
◇ Removal rating: 0.2, 0.45, 0.65 (μm)
◇ Effective filter area: single-layered ≥ 0.6 /10"; double-layered: ≥ 0.5 /10"
◇ Outer diameter: 69 mm, 83 mm, 130mm
Quality Assurance
◇ Endotoxin: < 0.25 EU/ml
◇ Filtrate: <30 mg per 10 inch (Φ69)
◇ Material safety: satisfying requirements of FDA on food and drug contact materials
◇ Double-layer cartridges, endurable to repeated steam sterilization (more than 50 times) in no-load state
Ordering Information
HFS--□--◎--◇--○--☆--△
|
□ |
◎ |
☆ |
|
△ |
||||||
|
No. |
Removal rating (μm) |
No. |
Support layer |
No. |
End caps |
No. |
O-rings material |
|||
|
002 |
0.2 |
H |
Single layer |
A |
215/flat |
S |
Silicone rubber |
|||
|
004 |
0.45 |
S |
Double layer |
B |
Both ends flat/both ends passing |
E |
EPDM |
|||
|
065 |
0.65 |
○ |
F |
Both ends flat/one end sealed |
B |
NBR |
||||
|
|
|
No. |
Length |
H |
Inner O-ring/flat |
V |
Fluorine rubber |
|||
|
|
|
5 |
5” |
J |
222 stainless steel liner/flat |
F |
Wrapped fluorine rubber |
|||
|
|
|
1 |
10” |
K |
222 stainless steel liner/fin |
|
|
|||
|
|
|
2 |
20” |
M |
222/flat |
◇ |
||||
|
|
|
3 |
30” |
P |
222/fin |
No. |
Class |
|||
|
|
|
4 |
40” |
Q |
226/fin |
P |
Pharmacy |
|||
|
|
|
|
|
O |
226/flat |
E |
Electronics |
|||
|
|
|
|
|
R |
226 stainless steel liner/fin |
G |
Food and pharmacy |
|||
|
|
|
|
|
W |
226 stainless steel liner/flat |
|
||||
