Europe style for Ptfe Pleated Filter Cartridge - Glass Firber membrane filter cartridge – kinda
Short Description:
Europe style for Ptfe Pleated Filter Cartridge - Glass Firber membrane filter cartridge – kinda Detail:
Glass Fibre Pleated Cartridge
This series filter cartridges are made of superfine glass fiber, showing extremely high dirt holding capacity, applicable to the pre-filtering of gases and liquids. Due to the ultralow protein absorption capability, they are also widely used in bio-pharmacy.
Key Features
High porosity, small differential pressure, strong dirt holding capacity, long service life;
With universal chemical compatibility and can filter acid-proof, alkali resistance, corrosion resistance liquids and organic solvents;
Deeply pleated structure with large filter area, quick flow rate and low protein absorption capability, improving the flow rate and filter efficiency;
Material Construction
◇ Filter medium: Superfine glass fiber (GF)
◇ Support/drainage: PP
◇ Core and cage: PP
◇ O-rings: see the cartridge list
◇ Seal method: melting
Typical Applications
◇ Removing oils, particles, and impurities out of compressed air;
◇ Air pre-filtering and precise filtration in the fermentation field;
◇ Removing cell debris and suspended solids in the bio-pharmacy field;
Operating Conditions
◇ Maximum working temperature: 80°C
◇ Sterilization temperature: 121°C; 30 minutes
◇ Maximum positive pressure difference: 0.42 MPa, 25°C
◇ Maximum negative pressure difference: 0.28 MPa, 60°C
Key Specifications
◇ Removal rating: 0.45, 0.7, 1.2, 3.0, 5.0, 10 (unit: μm)
◇ Effective filter area: 0.4~2.0 m2 /10″
◇ Outer diameter: 69 mm, 83 mm, 130 mm
Ordering Information
SCC–□–H–○–☆–△
□ |
○ |
☆ |
|
△ |
||||||
No. |
Removal rating (μm) |
No. |
Length |
No. |
End caps |
No. |
O-rings material |
|||
004 |
0.45 |
5 |
5” |
A |
215/flat |
S |
Silicone rubber |
|||
006 |
0.7 |
1 |
10” |
B |
Both ends flat/both ends passing |
E |
EPDM |
|||
010 |
1.2 |
2 |
20” |
F |
Both ends flat/one end sealed |
B |
NBR |
|||
030 |
3.0 |
3 |
30” |
H |
Inner O-ring/flat |
V |
Fluorine rubber |
|||
050 |
5.0 |
4 |
40” |
J |
222 stainless steel liner/flat |
F |
Wrapped fluorine rubber |
|||
100 |
10 |
|
|
K |
222 stainless steel liner/fin |
|
|
|||
|
|
|
|
M |
222/flat |
|
|
|||
|
|
|
|
P |
222/fin |
|
|
|||
|
|
|
|
Q |
226/fin |
|
|
|||
|
|
|
|
O |
226/flat |
|
|
|||
|
|
|
|
R |
226 stainless steel liner/fin |
|
|
|||
|
|
|
|
W |
226 stainless steel liner/flat |
|
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our company for the long-term to develop together with customers for mutual reciprocity and mutual benefit for Europe style for Ptfe Pleated Filter Cartridge - Glass Firber membrane filter cartridge – kinda, The product will supply to all over the world, such as: Qatar, Montpellier, Moldova, Our staffs are rich in experience and trained strictly, with qualified knowledge, with energy and always respect their customers as the No. 1, and promise to do their best to deliver the effective and individual service for customers. The Company pays attention to maintaining and developing the long-term cooperation relationship with the customers. We promise, as your ideal partner, we'll develop a bright future and enjoy the satisfying fruit together with you, with persisting zeal, endless energy and forward spirit.
By Frederica from San Francisco - 2018.05.13 17:00
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Irma from Islamabad - 2017.03.28 12:22