0.45micron pp membrane pleated filter cartridge for water treatment
Short Description:
HFP series cartridges filter media is made of thermal-sprayed porous PP fiber membrane, offering larger dirt holding capacity than conventional cartridges. Their hierarchical pores are designed to be gradually finer, avoiding cartridge surface from being blocked and prolonging service life of the cartridges.
High Flow HFP Polypropylene Cartridge
HFP series cartridges filter media is made of thermal-sprayed porous PP fiber membrane, offering larger dirt holding capacity than conventional cartridges. Their hierarchical pores are designed to be gradually finer, avoiding cartridge surface from being blocked and prolonging service life of the cartridges.
Key Features
◇ Quick passage rate; large dirt holding capacity, hierarchical interception, long service life;
◇ Imported materials which offer high interception efficiency and protect cartridges;
◇ Universal chemical compatibility, applicable to filter high viscous liquids with massive suspended solids;
Typical Applications
◇ Filtering colloid viscous liquids;
◇ Filtering cell culture solutions;
◇ Pre-filtering serums and blood products;
◇ Filtering syrups and zymotic fluids;
Material Construction
◇ Filter medium: PP
◇ Support/drainage: PP
◇ Core and cage: PP
◇ O-rings: see the cartridge list
◇ Seal method: melting
Key Specifications
◇ Removal rating: 0.1, 0.2, 0.45, 0.65, 0.8, 1.0, 2.0, 3.0, 5.0, 10 (unit: μm)
◇ Effective filter area: 0.4~2.0 m2 /10"
◇ Outer diameter: 69 mm, 83 mm, 130 mm
Operating Conditions
◇ Maximum working temperature: 80°C
◇ Sterilization temperature: 121°C; 30 minutes
◇ Maximum positive pressure difference: 0.42 MPa, 25°C
◇ Maximum negative pressure difference: 0.28 MPa, 60°C
◇ Thermal disinfection: 75~85°C, 30 minutes
Ordering Information
HFP--□--H--○--☆--△
|
□ |
○ |
☆ |
|
△ |
||||||
|
No. |
Removal rating (μm) |
No. |
Length |
No. |
End caps |
No. |
O-rings material |
|||
|
001 |
0.1 |
5 |
5” |
A |
215/flat |
S |
Silicone rubber |
|||
|
002 |
0.2 |
1 |
10” |
B |
Both ends flat/both ends passing |
E |
EPDM |
|||
|
004 |
0.45 |
2 |
20” |
F |
Both ends flat/one end sealed |
B |
NBR |
|||
|
006 |
0.65 |
3 |
30” |
H |
Inner O-ring/flat |
V |
Fluorine rubber |
|||
|
008 |
0.8 |
4 |
40” |
J |
222 stainless steel liner/flat |
F |
Wrapped fluorine rubber |
|||
|
010 |
1.0 |
|
|
K |
222 stainless steel liner/fin |
|
|
|||
|
020 |
2.0 |
|
|
M |
222/flat |
|
|
|||
|
030 |
3.0 |
|
|
P |
222/fin |
|
|
|||
|
050 |
5.0 |
|
|
Q |
226/fin |
|
|
|||
|
100 |
10 |
|
|
O |
226/flat |
|
|
|||
|
|
|
|
|
R |
226 stainless steel liner/fin |
|
|
|||
|
|
|
|
|
W |
226 stainless steel liner/flat |
|
||||
