Hydrophilic PTFE Filter Cartridge
Short Description:
YWF series cartridges filter media is a hydrophilic PTFE membrane, being able filter low-concentration polar solvent. They have universal chemical compatibility, applicable to sterilization of such solvents as alcohols, ketones, and esters. At present, they are widely applied in pharmacy, food, chemical industry, and electronics. YWF cartridges show excellent heat resistance, they can be repeatedly used in online steam sterilization or high-pressure disinfection. YWF cartridges also have high interception efficiency, high guarantee, and long service life.
Hydrophilic Polytetrafluoroethylene Cartridge
YWF series cartridges filter media is a hydrophilic PTFE membrane, being able filter low-concentration polar solvent. They have universal chemical compatibility, applicable to sterilization of such solvents as alcohols, ketones, and esters. At present, they are widely applied in pharmacy, food, chemical industry, and electronics. YWF cartridges show excellent heat resistance, they can be repeatedly used in online steam sterilization or high-pressure disinfection. YWF cartridges also have high interception efficiency, high guarantee, and long service life.
Key Features
◇ Fusion welding; no object emission, low precipitation, long service life;
◇ Stable hydrophile, easy to get wet, hydrophilic performance will not decrease as time passes by or temperature changes;
◇ Single- or double-layer, solid structure; endurable to repeated online sterilization;
◇ Cartridge independently numbered, production batch traceable;
◇ Passing 100% integrity test; quality safe and reliable;
Typical Applications
◇ Filtering low-concentration polar solvents and sterilization;
◇ Sterilization of acids and alkalis and particle removal;
◇ Purification requirements in chemical industry, electronics, and microelectronics;
◇ Sterilization of antibiotic solutions;
Material Construction
◇ Filter medium: Hydrophilic PTFE
◇ Support/drainage: PP
◇ Core and cage: PP
◇ O-rings: see the cartridge list
◇ Seal method: melting
Operating Conditions
◇ Maximum working temperature: 90°C, 0.20 Mpa
◇ Sterilization temperature: 121°C; 30 minutes
◇ Maximum positive pressure difference: 0.42 MPa, 25°C
◇ Maximum negative pressure difference: 0.21 MPa, 25°C
Key Specifications
◇ Removal rating: 0.1, 0.2, 0.45, 0.8, 1.0, 3.0, 5.0 (unit: μm)
◇ Effective filter area: single-layered ≥ 0.6 /10"; double-layered: ≥ 0.5 /10"
◇ Outer diameter: 69 mm, 83 mm, 130 mm
Quality Assurance
◇ Passing USP biological reactivity test to class VI plastics
◇ Filtrate: <10 mg per 10 inch cartridge (Φ69)
◇ Endotoxin: < 0.25 EU/ml
◇ Endurable to repeated steam sterilization (more than 50 times) in no-load state
Ordering Information
YWF--□--◎--◇--○--☆--△
|
□ |
◎ |
☆ |
|
△ |
||||||
|
No. |
Removal rating (μm) |
No. |
Support layer |
No. |
End caps |
No. |
O-rings material |
|||
|
010 |
0.1 |
H |
Single layer |
A |
215/flat |
S |
Silicone rubber |
|||
|
002 |
0.2 |
S |
Double layer |
B |
Both ends flat/both ends passing |
E |
EPDM |
|||
|
004 |
0.45 |
○ |
F |
Both ends flat/one end sealed |
B |
NBR |
||||
|
008 |
0.8 |
No. |
Length |
H |
Inner O-ring/flat |
V |
Fluorine rubber |
|||
|
010 |
1.0 |
5 |
5” |
J |
222 stainless steel liner/flat |
F |
Wrapped fluorine rubber |
|||
|
030 |
3.0 |
1 |
10” |
K |
222 stainless steel liner/fin |
|
|
|||
|
050 |
5.0 |
2 |
20” |
M |
222/flat |
◇ |
||||
|
|
|
3 |
30” |
P |
222/fin |
No. |
Class |
|||
|
|
|
4 |
40” |
Q |
226/fin |
P |
Pharmacy |
|||
|
|
|
|
|
O |
226/flat |
E |
Electronics |
|||
|
|
|
|
|
R |
226 stainless steel liner/fin |
G |
Food and pharmacy |
|||
|
|
|
|
|
W |
226 stainless steel liner/flat |
|
||||
